Back to Blog
Pressure Washing Concrete
Concrete cleaning is challenging, and there are two methods. One thing to bear in mind when pressure washing concrete is that it cannot always be restored to appear brand new after it has been soiled. Stains can be lightened or bleached, but completely removing them is difficult. You might strike it rich, but if you're looking for perfection, you'll be let down. As a result, inform customers up front and explain this; otherwise, they will request a job that can only be done if the entire concrete slab is removed and re-poured.
Let's have a look at the tools that will be needed for this job. When utilizing a pressure washer, remember that safety comes first. Some stains may require the use of chemicals to remove. As a result, eye protection should be used at all times. In addition, you must wear pants when working with chemicals to protect your legs. Chemicals used in concrete are incredibly potent and should not be interfered with. Do you prefer to work on dry or wet feet? Rubber waders or equivalent rubber boots are recommended. They'll keep your feet dry and safe from the scorching heat of the 250°F water.
Orange cones are also required for this job. These can help make people aware that you're there if you're in a high-traffic location or if there are a lot of contract workers, such as at a newly constructed house that needs the concrete cleaned. This assures the safety of others around you, as well as helping to prevent mishaps. This will, of course, necessitate the use of a Hydro-Twister. You could technically do the job with a wand, but it would take a lot longer and use a lot more water, not to mention the possibility of streaking if you don't apply even strokes throughout the slab. A hydro twister type device is an option on most new hot water pressure washers, but if you don't have one and/or need a backup, we recommend acquiring one. Choose the larger of the two alternatives when purchasing a hydro twister. Despite the fact that the difference in surface covering is only 5 inches, it is definitely worth it when trying to save time without cutting corners. There's a lot of concrete to clean, especially if you're cleaning concrete at a construction site or a big box store, and the faster you clean it, the more money you'll make. Take a time to think about that.
Back to Blog
When it comes to concrete pond construction, there are no short cuts. Improper practices can result in more money being spent on maintenance, repairs, and replacement than on the original building cost. Because good concrete pond construction means a pond that will last a lifetime or longer, follow these guidelines to get it right the first time!
Keep in mind that you'll need to pour the concrete to a thickness of four to six inches for a proper concrete pond. All soil (and rocks!) should be dug out after settling on the measurements and delineating the area. Then, coupled with the proper positioning of cut-to-fit reinforcement bars, forms must be made and installed where concrete will be poured (rebar).
Shovels, picks, a crowbar, and, of course, a wheelbarrow are required for digging up the area for concrete pond building. A carpenters level, string, stakes, sheets of plastic, and a long two-by-four are among the other goods required.
Unless the pond is exceptionally large, pouring the cement in concrete pond building should be done in portions, which should be done in one day. Pour the cement into the pool's bottom first, then the sides. If shelves have been excavated out, the next step is to pour cement there. Finally, pour cement for the pond's top as well as any coping that may be necessary.
After you've finished the first few steps of your concrete pond construction project, you'll need to let the cement cure under plastic for a few days. Muriatic acid treatment at this stage helps to prevent high pH levels in the water later on, which is good for fish and plants. Apply multiple layers of pool paint or masonry sealant after the acid treatment, allowing each coat to cure completely between coats.
Constructing a concrete pond can be a great learning experience. It's advisable to start with a smaller pond and work your way up to a larger endeavor if you're successful. However, if you've mastered the art of building concrete ponds, there's no telling where you may go from there. So go ahead and study, construct, and build some more!